- Lifecycle Status
- فعال
- Repair Options Available
- ندارد
- Number Of Channels
- 4 Channel
- Output Signal
- Analog
- Accuracy drift with temperature
- Voltage: 0.200% full scale, Current: 0.300% full scale, RTD: 0.200% full scale, Thermocouple/mvolt: 0.200% full scale
- Analogue inputs configurable
- true
- Analogue outputs configurable
- false
- Calibrated accuracy
- Voltage: 0.100% full scale @ 25 °C Current: 0.100% full scale @ 25 °C RTD: 0.100% full scale @ 25 °C Thermocouple/mvolt: 0.100% full scale @ 25 °C
- Calibration methods
- Factory calibrated, User-performed (optional)
- CJC inputs
- Two CJC sensors, 2 thermistors embedded in 5069-RTB14CJC-(screw or spring) RTB, -or- 2 thermistors wired to 5069-RTB18-(screw or spring) RTB, Thermistor type: Measurement specialties, Inc. 10K3A1A, (for thermocouple mode use only)
- Common mode noise rejection ratio
- 130 dB @ 50/60 Hz
- Common mode voltage
- ±10V (Current mode and 3-wire RTD mode), ±2V (Voltage mode)
- Conducted RF immunity
- 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
- Data format
- IEEE 32-bit floating point
- Data value during overload condition
- Full scale, overrange flag, Data uncertain / data bad
- عمق
- 105.42 mm
- DIN rail
- Compatible zinc-plated chromate-passivated steel DIN rail, You can use the EN50022 - 35 x 7.5 mm (1.38 x 0.30 in)
- EFT/B immunity
- ±4kV @ 5kHz on power ports, ±3kV @ 5kHz on shielded input ports
- Emissions
- IEC 61000-6-4
- Enclosure type
- None (open-style)
- ESD immunity
- 6 kV contact discharges, 8 kV air discharges
- HART handheld compliance
- Add an external 250 Ω resistor into the current loop for HART transmitter compliance
- ارتفاع
- 144.57 mm
- Indicators
- 1 green/red module status indicator, 4 yellow/red I/O status indicators, 2 yellow/red CJC status indicators
- Input anti-aliasing filter cutoff frequency, typical
- 500 Hz
- Input, current
- true
- Input digital filter
- First order lag, 0 ms…32,767 ms (32.767 s)
- Input impedance
- Voltage: >1 MΩ, Current: 90 Ω typical, 70…110 Ω range, RTD: >1 MΩ, Thermocouple/mvolt: >1 MΩ
- Input notch filter (Hz) selections
- 5, 10 (50/60 default), 15, 20, 50, 60, 100, 200, 500, 1000, 2500, 5000, 10000, 15625, 25000, 31250, 62500
- Input range, current
- 0...20mA @ 4....20mA
- Input range, resistive
- 1...500 Ω, 2...1000 Ω, 4...2000 Ω, 8...4000 Ω
- Input range, thermocouple / millivolt
- ±100 mV
- Input range, voltage
- ±10V @ 0...10V, 0...5V
- Input, resistance thermometer
- true
- Input, resistor
- true
- Inputs
- 4 differential