Specialist electrical and industrial automation store
فارسی
Store/PLC and HMI/1756-IF4FXOF2F

Analog I/O module Allen-Bradley model 1756-IF4FXOF2F

Analog I/O module Allen-Bradley model 1756-IF4FXOF2F,  Part number 1756-IF4FXOF2F

Check the part number and technical specifications before selection; an image alone is not sufficient for matching.

Manufacturer part number
1756-IF4FXOF2F
Manufacturer
Allen-Bradley
ARAN VISION part number
AV-FEED-1IYXYMQ
Category
PLC and HMI
Product description
Analog I/O module Allen-Bradley part number 1756-IF4FXOF2F; Lifecycle Status: Active; Repair Options Available: Yes; Display: Module Health, In Calibration,Mode. Technical specifications, condition and supply feasibility are checked before ordering.
Manufacturer standard lead time
Manufacturer confirmation required

Manufacturer replenishment time; delivery to you is confirmed separately.

Product attributes

Lifecycle Status
Active
Repair Options Available
Yes
Display
Module Health, In Calibration,Mode
Input Signal
+/- 10V, 0-10.5V, 0-5.25V.,0-21mA
Isolation
None between channels (Single,Ended)
Output Signal
+/- 10.4V, 0-21mA
Special Features
Sub-ms channel scans,Synchronized sAling across,multiple modules
Analogue inputs configurable
true
Analogue outputs configurable
false
Calibrated accuracy
Input: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F), Output: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F)
Conducted RF immunity
10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports
Current draw
375mA @ 5.1V, 100mA @ 24V
Data format
Integer mode (left justified, 2 s complement) IEEE 32-bit floating point
Drive capability
Voltage: >2000 Ω, Current: 0...750 Ω
EFT/B immunity
±2kV @ 5kHz on shielded signal ports
Emissions
IEC 61000-6-4
Enclosure type rating
None (open-style)
ESD immunity
6 kV contact discharges, 8 kV air discharges
Gain drift with temperature
Voltage: 25 ppm/°C maximum, input, Current: 35 ppm/°C maximum, input, Voltage: 25 ppm/°C maximum, output, Current: 50 ppm/°C maximum, output
Input conversion method
Successive approximation
Input, current
true
Input impedance
Voltage: >1 MΩ, Current: 249 Ω
Input range
±10V @ 0...10V, 0...5V @ 0...20mA
Input, resistance thermometer
false
Input, resistor
false
Input signal, configurable
true
Input, thermocouple
false
Input, voltage
true
Isolation voltage
250V (continuous), Reinforced insulation type, inputs and outputs to backplane, No isolation between individual inputs or outputs
Module error
Input: 0.2% of range, Voltage: 0.2% of range, output, Current: 0.3% of range, output
Module keying
Electronic, software configurable
Module scan time
300 µs minimum
Nonoperating temperature
-40 °C
North American temperature code
T4A
Number, input
4 high-speed, subms, differential
Number, output
2 high-speed voltage or current
Report a product information error
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet

Source checked: 2026-09-02

Product questions

Send the part number and your question to support to check compatibility, lead time or specifications.

Additional information and order matching

The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Technical code verification

Model, revision and equipment compatibility are checked before final confirmation.

Clear product condition

New, surplus or refurbished condition and warranty terms are stated in the quotation.

Products outside the catalog

If this model is unavailable, send the part number or nameplate photo for custom sourcing.

Related products