Industrial pressure sensor Honeywell model MLH100PGL01B

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference: AV-FEED-WJ5H53
Category: Sensors and machine vision
Manufacturer sourcing lead time: Manufacturer confirmation required
Delivery to your location is confirmed separately.
Documents / datasheets: ARAN VISION specification sheet

Technical specifications

Applications: Industrial automation
Pressure Type: Vented Gauge
Operating Pressure: 100PSI (689.48kPa)
Output Type: Analog Current
Output: 4 mA ~ 20 mA
Voltage - Supply: 9.5V ~ 30V
Port Size: Male - 1/4" (6.35mm) NPT
Port Style: Threaded
Features: Amplified Output, Temperature Compensated
Connection type: Cable 1m
Package / Case: Cylinder, Metal
Maximum Pressure: 300 psi proof pressure; not the operating range. Operating range 0-100 psi; burst pressure 1000 psi (Issue D Table 1).
Accuracy: +/-0.25 %FSS BFSL at 25 C; excludes thermal errors. Vented-gage total error band +/-3 %FSS below 300 psi.
Operating Temperature: -40 to 125 C; current-output operating area depends on supply and load. Figure 3 specifies 95 C maximum at 24 V with 250 ohm load.
Protection rating: IP65 for vented-gage L cable-harness version; higher sealed-gage cable ratings do not apply.

Report a product-data issue

Documents / datasheets

Manufacturer datasheet · MLH100PGL01B / MLH Series / 32328895-D-EN · en · PDF · 32328895-D-ENManufacturer source: Honeywell · Document author: Honeywell · Model explicitly covered in family document · Covered models: MLH100PGL01B · Checked: 2026-10-16View / print the ARAN VISION specification sheet

Description

Industrial pressure sensor Honeywell part number MLH100PGL01B; Voltage - Supply: 9.5V ~ 30V; Applications: Industrial automation; Pressure Type: Vented Gauge. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.