Industrial I/O module ifm model AL2203

Technical specifications

Operating voltage [V]

18...30 DC

Current consumption [mA]

100; (US)

Protection class

III

Additional voltage supply [V]

18...30 DC; (UA)

Max. current consumption from additional supply [mA]

3600; (UA)

Total number of inputs and outputs

16

Number of inputs and outputs

Number of digital inputs: 16; Number of analogue inputs: 8; Number of digital outputs: 16

Number of digital inputs

16; (configurable)

Input circuit of digital inputs

PNP; (type 3 (IEC 61131-2))

Sensor supply of the inputs

UA

Voltage supply [V]

18...30

Input current High [mA]

2...15

Input current Low [mA]

0...1.5

Switching level high [V]

11...28

Switching level low [V]

0...5

Number of analogue inputs

8; (configurable current/voltage input)

Analogue input (current) [mA]

4...20

Analogue input (voltage) [V]

0...10

Resolution

16 Bit

Number of digital outputs

16; (configurable)

Max. current load per output [mA]

1800

Total current rating of all outputs [A]

3.6; (max. current load per segment: 1800 mA)

Short-circuit protection

Yes

Actuator supply outputs

UA

Communication interface

IO-Link

Transmission type

COM3 (230,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Common - I&D: Identification and Diagnosis

SIO mode

No

Required master port type

B

Min. process cycle time [ms]

4

Supported DeviceIDs

Type of operation: DeviceID; Acyclic parametrisation: 1406; Factory setting: Cyclic parametrisation: 1405

Note

The parameter setting can be changed from cyclical to acyclical.; For further information please see the IODD PDF file under "Downloads"

Ambient temperature [°C]

-25...60

Storage temperature [°C]

-25...70

Max. relative air humidity [%]

90

Max. height above sea level [m]

2000

Protection rating

IP 65; IP 67; IP 69K; (operation with stainless steel protective caps: IP 69K)

Protection rating (NEMA 250)

6P

Pollution degree

2

Chemical media

ISO 16750-5: HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1: AA

EMC

EN 61000-6-2; EN 61000-6-4; IEC 61131-9

Shock resistance

DIN EN 60068-2-27

Vibration resistance

DIN EN 60068-2-64; DIN EN 60068-2-6

MTTF [years]

40

Weight [g]

398.7

Housing

rectangular

Type of mounting

backplane mounting

Dimensions [mm]

208 x 59.3 x 38.4

Materials

housing: PA grey; socket: stainless steel (316L/1.4404)

Sealing material

EPDM

Tightening torque [Nm]

< 0.8

Display

operation: 1 x LED, green; fault: 1 x LED, red; function: 1 x LED, yellow

Accessories (optional)

protective cap for M12 sockets

Pack quantity

1 pcs.

Connector

8 x M12; coding: A; Contacts: 4; Sealing: EPDM

Manufacturer device scope

IO-Link input/output device, requiring a Class B master port; not an IO-Link master. COM3, minimum process cycle 4 ms; SIO mode not supported.

Manufacturer I/O scope

16 total I/O; 16 digital input, 16 digital output and 8 analogue input capabilities depend on configuration, not 40 simultaneously available channels. Analogue input selectable 4–20 mA or 0–10 V, 16 bit.

Manufacturer output scope

1.8 A maximum per output and per segment; 3.6 A total output current. Segment and total limits still apply; supply UA 18–30 V DC.

DeviceID scope

1405 cyclic parameterisation is factory mode; 1406 is acyclic parameterisation. Verify IODD/device revision before commissioning.

Manufacturer protection scope

IP65 / IP67; IP69K operation requires stainless steel protective caps.