نشان ARAN VISION

ARAN VISION

Datasheet فنی محصول

PV7604Document: AV-FEED-FTCJ0J
Industrial pressure sensor ifm model PV7604,  Part number PV7604

ifm · سنسور and ویژن

Industrial pressure sensor ifm model PV7604

Industrial pressure sensor ifm part number PV7604; Number of inputs and outputs: Number of digital outputs: 2; Measuring range: -1...10 bar: -14.5...145 psi: -100...1000 kPa: -0.1...1 MPa; Process connection: threaded connection 1/4" NPT external thread internal thread:M5. Technical specifications, condition and supply feasibility are checked before ordering.

Manufacturer part number
PV7604
Brand
ifm
Category
سنسور and ویژن
Status فهرست
Request a quotation

Specifications فنی

Number of inputs and outputs
Number of digital outputs: 2
Measuring range
-1...10 bar: -14.5...145 psi: -100...1000 kPa: -0.1...1 MPa
Process connection
threaded connection 1/4" NPT external thread internal thread:M5
Measuring element
metallic thin film cell
Application
for industrial applications
Media
liquids and gases
Medium temperature [°C]
-40...90
Min. burst pressure
300 bar: 4350 psi: 30 MPa
Pressure rating
25 bar: 360 psi: 2.5 MPa
Note on pressure rating
static
Vacuum resistance
-1000 mbar: -0.1 MPa
Type of pressure
relative pressure; vacuum
MAWP for applications according to CRN [bar]
25
Operating voltage [V]
18...30 DC
Current consumption [mA]
< 15
Min. insulation resistance [MΩ]
100; (500 V DC)
Protection class
III
Reverse polarity protection
Yes
Power-on delay time [s]
< 0.3
Total number of outputs
2
Output signal
switching signal; IO-Link; (configurable)
Electrical design
PNP/NPN
Number of digital outputs
2
Output function
normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]
2
Permanent current rating of switching output DC [mA]
100
Switching frequency DC [Hz]
< 170
Short-circuit protection
Yes
Type of short-circuit protection
pulsed
Overload protection
Yes
Set point SP
-0.9...10 bar: -13.1...145 psi: -0.09...1 MPa
Reset point rP
-0.95...9.95 bar: -13.8...144.3 psi: -0.095...0.995 MPa
In steps of
0.005 bar: 0.1 psi: 0.0005 MPa
Factory setting
SP1 = 2.5 bar: rP1 = 2.3 bar: ou1 = Hno;; SP2 = 7.5 bar: rP2 = 7.3 bar: ou2 = Hno;; dS1/dS2 = 0 ms: dr1/dr2 = 0 ms; coF = 0 %: P-n = PnP: dAP= 60 ms
Switch point accuracy [% of the span]
< ± 0,5 (nach DIN EN 61298-2)
Repeatability [% of the span]
< ± 0,05; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]
< ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity deviation [% of the span]
< ± 0,1 (BFSL) / < ± 0,2 (LS)
Zero-point stabilisation [% of the span]
IO-Link: 1,0; (see operating instructions zero-point behaviour); switching output: 1,0
Hysteresis deviation [% of the span]
< ± 0,2
Long-term stability [% of the span]
< ± 0,1; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]
< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)
Temperature coefficient span [% of the span / 10 K]
< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)
Response time [ms]
< 3
Parameter setting options
hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
Profiles
Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis
SIO mode
Yes
Required master port type
A
Min. process cycle time [ms]
5
Supported DeviceIDs
Type of operation: DeviceID; default: 855
Ambient temperature [°C]
-40...90
Storage temperature [°C]
-40...100
Protection rating
IP 67; IP 69K
EMC
DIN EN 61326-1
Shock resistance
DIN EN 60068-2-27: 500 g (1 ms)
Vibration resistance
DIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]
668
UL approval
UL approval no.: J015
Pressure Equipment Directive
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Weight [g]
66
Housing
cylindrical
Dimensions [mm]
Ø 18.9 / L = 66.9
Materials
stainless steel (630/1.4542/17-4 PH); stainless steel (316L/1.4404); PEI
Materials (wetted parts)
stainless steel (303/1.4305); stainless steel (630/1.4542/17-4 PH)
Min. pressure cycles
60 million; (at 1.2 times nominal pressure)
Tightening torque [Nm]
50; (recommended tightening torque; depends on the lubrication, the seal and the pressure load)
Restrictor element integrated
Yes
Remarks
BFSL = Best Fit Straight Line; LS = limit value setting
Pack quantity
1 pcs.
Connector
1 x M12; coding: A; Contacts: 4

این برگه, خلاصه فارسی Specifications محصول for Quick links است. for طراحی, Mounting and انتخاب نهایی, آخرین Official manufacturer documentation and تطابق Complete Part number بررسی شود.