Specialist electrical and industrial automation store
فارسی
Store/سنسور and ویژن/SA6014

Flow sensor ifm model SA6014

Flow sensor ifm model SA6014, Part number SA6014

Check the part number and technical specifications before selection; an image alone is not sufficient for matching.

Manufacturer part number
SA6014
Manufacturer
ifm
ARAN VISION part number
AV-FEED-1J2GFTR
Product description
Flow sensor ifm part number SA6014; Number of inputs and outputs: Number of analogue outputs: 2; Process connection: threaded connection 1/2" NPT external thread; Special feature: Gold-plated contacts. Technical specifications, condition and supply feasibility are checked before ordering.
Manufacturer standard lead time
Manufacturer confirmation required

Manufacturer replenishment time; delivery to you is confirmed separately.

Product attributes

Number of inputs and outputs
Number of analogue outputs: 2
Process connection
threaded connection 1/2" NPT external thread
Special feature
Gold-plated contacts
Media
water; glycol solutions; air; oils
Note on media
low-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F); high-viscosity oils with viscosity: > 40 mm²/s (104 °F)
Medium temperature [°F]
-4...194
Pressure rating
100 bar: 1450 psi: 10 MPa
MAWP for applications according to CRN [bar]
100
Operating voltage [V]
18...30 DC
Current consumption [mA]
< 100
Protection class
III
Reverse polarity protection
Yes
Power-on delay time [s]
10
Measuring principle
calorimetric
Total number of outputs
2
Output signal
analogue signal
Number of analogue outputs
2
Analogue current output [mA]
4...20; (scalable)
Max. load [Ω]
350
Short-circuit protection
Yes
Type of short-circuit protection
pulsed
Overload protection
Yes
Probe length L [mm]
26.6
Operating mode
relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended; Factory setting: relative)
Resolution [ft/s]
0.05
Analogue start point ASP [ft/s]
0...7.95
Analogue end point AEP [ft/s]
1.9...9.85
Resolution [ft/s]
2
Analogue start point ASP [ft/s]
0...264
Analogue end point AEP [ft/s]
64...328
Measuring range [°F]
-4...194
Resolution [°F]
0.5
Analogue start point [°F]
-4...169
Analogue end point [°F]
39...212
In steps of [°F]
0.5
Setting range [ft/s]
0...9.85
Greatest sensitivity [ft/s]
0.15...9.85
Setting range [ft/s]
0...19.5
Setting range [ft/s]
6...328
Greatest sensitivity [ft/s]
6...328
Setting range [ft/s]
6...656
Temperature drift [cm/s x 1/K]
0,01 fps x 1/K (< 68 °F; > 158 °F)
Temperature gradient [K/min]
100
Repeatability
0,05 m/s; (water; flow velocity: 0,05...3 m/s)
Accuracy
± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 68...158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Temperature drift
± 0,003 K/°F
Accuracy [K]
± 0,3 / ± 1; (water; flow velocity: 1...9,85 fps / air; flow velocity: > 32,8 fps)
Response time [s]
0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Dynamic response T05 / T09 [s]
1,5 (T09); (water; flow velocity: 1...9,85 fps)
Parameter setting options
medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
Ambient temperature [°F]
-40...176
Storage temperature [°F]
-40...212
Protection rating
IP 65; IP 67
EMC
DIN EN 60947-5-9
Shock resistance
DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]
180
UL approval
UL approval no.: I004; File number UL: E174189
Weight [g]
268
Housing
cylindrical
Dimensions [mm]
Ø 34 / L = 133.4
Materials
stainless steel (316L/1.4404); stainless steel (301/1.4310); PBT-GF20; PBT-GF30
Materials (wetted parts)
stainless steel (316L/1.4404)
Probe diameter [mm]
5
Installation length EL [mm]
26.6
Display
Display unit: 6 x LED, green (%, fps, gpm, cfm, °F, 10³); measured values: alphanumeric display, red/green 4-digit
Remarks
MW = measured value; MEW = Final value of the measuring range
Pack quantity
1 pcs.
Connector
1 x M12; coding: A; Contacts: 4, gold-plated
Report a product information error
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet
Official product pageifm

Source checked: 2026-09-11

Product questions

Send the part number and your question to support to check compatibility, lead time or specifications.

Additional information and order matching

The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Technical code verification

Model, revision and equipment compatibility are checked before final confirmation.

Clear product condition

New, surplus or refurbished condition and warranty terms are stated in the quotation.

Products outside the catalog

If this model is unavailable, send the part number or nameplate photo for custom sourcing.

Related products