Authenticity and condition
Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.
Specialist electrical and industrial automation store
Digital input module Siemens model 6ES75211BH000AB0
Check the part number and technical specifications before selection; an image alone is not sufficient for matching.
- Manufacturer part number
6ES75211BH000AB0- Manufacturer
- Siemens
- ARAN VISION part number
AV-FEED-LFTFN5- Category
- PLC and HMI
- Product description
- Digital input module Siemens part number 6ES75211BH000AB0; Product type designation: DI 16x24VDC HF; Firmware version: V2.2.0; PROFIBUS from GSD version/GSD revision: V1.0 / V5.1. Technical specifications, condition and supply feasibility are checked before ordering.
- Manufacturer standard lead time
- Manufacturer confirmation required
Manufacturer replenishment time; delivery to you is confirmed separately.
- Datasheet
- ARAN VISION datasheet
Product attributes
- Product type designation
- DI 16x24VDC HF
- Firmware version
- V2.2.0
- PROFIBUS from GSD version/GSD revision
- V1.0 / V5.1
- PROFINET from GSD version/GSD revision
- V2.3 / -
- Rated value (DC)
- 24 V
- permissible range, lower limit (DC)
- 19.2 V
- permissible range, upper limit (DC)
- 28.8 V
- Number of digital inputs
- 16
- Counting width
- 32 bit
- Monitoring the supply voltage
- Yes
- Monitoring of the supply voltage (PWR-LED)
- Yes; green LED
- Width
- 35 mm
- Height
- 147 mm
- Depth
- 129 mm
- HW functional status
- from FS04
- FW update possible
- Yes
- I&M data
- Yes; I&M0 to I&M3
- Isochronous mode
- Yes
- Prioritized startup
- Yes
- STEP 7 TIA Portal configurable/integrated from version
- V13 SP1 / -
- STEP 7 configurable/integrated from version
- V5.5 SP3 / -
- DI
- Yes
- Counter
- Yes
- Oversampling
- No
- MSI
- Yes
- Reverse polarity protection
- Yes
- Current consumption, max.
- 20 mA
- Power consumption from the backplane bus
- 1.1 W
- Power loss, typ.
- 2.6 W
- Inputs
- 2 byte; typical, maximum 20 bytes, see manual for details
- Outputs
- 0 byte; typical, maximum 16 bytes, see manual for details
- Digital inputs, parameterizable
- Yes
- Sourcing/sinking input
- P-reading
- Input characteristic curve in accordance with IEC 61131, type 3
- Yes
- Pulse extension
- No
- Edge evaluation
- Yes; Positive edge, negative edge
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet
Official product pageSiemens
Source checked: 2026-09-11
Product questions
Send the part number and your question to support to check compatibility, lead time or specifications.
Additional information and order matching
The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.
Matching technical version
The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.
Delivery estimate before ordering
Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.
Technical code verification
Model, revision and equipment compatibility are checked before final confirmation.
Clear product condition
New, surplus or refurbished condition and warranty terms are stated in the quotation.
Products outside the catalog
If this model is unavailable, send the part number or nameplate photo for custom sourcing.
Related products
Official product image; © Schneider ElectricTM221CE16R
2907446
Representative product-family image; check the model specifications in the datasheet. © OmronCP2E-N14DR-ARepresentative product-family image; check the model specifications in the datasheet. © OmronCP2E-N14DT-A