Specialist electrical and industrial automation store
فارسی
Store/سنسور and ویژن/SI5006

Flow sensor ifm model SI5006

Flow sensor ifm model SI5006, Part number SI5006

Check the part number and technical specifications before selection; an image alone is not sufficient for matching.

Manufacturer part number
SI5006
Manufacturer
ifm
ARAN VISION part number
AV-FEED-FQZI47
Product description
Flow sensor ifm part number SI5006; Number of inputs and outputs: Number of digital outputs: 1; Process connection: threaded connection M18 x 1,5 internal thread; Media: Liquids; Gases. Technical specifications, condition and supply feasibility are checked before ordering.
Manufacturer standard lead time
Manufacturer confirmation required

Manufacturer replenishment time; delivery to you is confirmed separately.

Product attributes

Number of inputs and outputs
Number of digital outputs: 1
Process connection
threaded connection M18 x 1,5 internal thread
Media
Liquids; Gases
Medium temperature [°C]
-25...80
Pressure rating
300 bar: 30 MPa
MAWP for applications according to CRN [bar]
208
Frequency AC [Hz]
47...63
Operating voltage tolerance [%]
-15...10
Operating voltage [V]
90...240 AC
Max. power consumption [VA]
3.5
Protection class
II
Reverse polarity protection
No
Power-on delay time [s]
10
Total number of outputs
1
Output signal
switching signal
Electrical design
relay
Number of digital outputs
1
Output function
normally open / normally closed; (parameterisable)
Contact rating
3 A (250 V AC / 30 V DC); (number of switching cycles: 20 million mechanically; switching cycles at 3 A load: 100,000 electrical; type of switch-off: normally open)
Short-circuit proof
No
Overload protection
No
Probe length L [mm]
45
Setting range [cm/s]
3...300
Greatest sensitivity [cm/s]
3...100
Setting range [cm/s]
200...3000
Greatest sensitivity [cm/s]
200...800
Repeatability [% of Sr]
1...5
Note on repeatability
for water 5...100 cm/s; 25 °C; Factory setting
Temperature drift [cm/s x 1/K]
0.1; (for water 5...100 cm/s; 10...70 °C)
Temperature gradient [K/min]
300
Switch point accuracy [cm/s]
± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting)
Hysteresis [cm/s]
2...5; (for water 5...100 cm/s; 25 °C; Factory setting)
Response time [s]
1...10
Adjustment of the switch point
pushbutton
Ambient temperature [°C]
-25...80
Storage temperature [°C]
-25...100
Protection rating
IP 67
EMC
DIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistance
DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6: 18 g (55...2000 Hz)
MTTF [years]
221
Weight [g]
262.5
Housing
cylindrical
Dimensions [mm]
Ø 50 / L = 113
Materials
stainless steel (316L/1.4404); stainless steel (304/1.4301); PC; PBT-GF20; EPDM/X
Materials (wetted parts)
stainless steel (316L/1.4404); O-ring: FKM 80 Shore A
Probe diameter [mm]
8.2
Installation length EL [mm]
45
Display
function: 10 x LED, three-colour
Required protection
miniature fuse to IEC60127-2 sheet 1; ≤ 5 A; fast acting
Remarks
Recommendation Check the safe functioning of the unit after a short circuit.
Pack quantity
1 pcs.
Connector
1 x 1/2"; coding: C; Contacts: 5
Report a product information error
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet
Official product pageifm

Source checked: 2026-09-11

Product questions

Send the part number and your question to support to check compatibility, lead time or specifications.

Additional information and order matching

The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Technical code verification

Model, revision and equipment compatibility are checked before final confirmation.

Clear product condition

New, surplus or refurbished condition and warranty terms are stated in the quotation.

Products outside the catalog

If this model is unavailable, send the part number or nameplate photo for custom sourcing.

Related products