Specialist electrical and industrial automation store
فارسی
Store/سنسور and ویژن/SI5010

Flow sensor ifm model SI5010

Flow sensor ifm model SI5010, Part number SI5010

Check the part number and technical specifications before selection; an image alone is not sufficient for matching.

Manufacturer part number
SI5010
Manufacturer
ifm
ARAN VISION part number
AV-FEED-DIZJ2G
Product description
Flow sensor ifm part number SI5010; Number of inputs and outputs: Number of digital outputs: 1; Process connection: threaded connection M18 x 1,5 internal thread; Media: Liquids; Gases. Technical specifications, condition and supply feasibility are checked before ordering.
Manufacturer standard lead time
Manufacturer confirmation required

Manufacturer replenishment time; delivery to you is confirmed separately.

Product attributes

Number of inputs and outputs
Number of digital outputs: 1
Process connection
threaded connection M18 x 1,5 internal thread
Media
Liquids; Gases
Medium temperature [°C]
-25...80
Pressure rating
300 bar: 30 MPa
MAWP for applications according to CRN [bar]
208
Operating voltage [V]
18...36 DC
Current consumption [mA]
< 60
Protection class
III
Reverse polarity protection
Yes
Power-on delay time [s]
10
Total number of outputs
1
Output signal
switching signal; IO-Link; (configurable)
Electrical design
PNP
Number of digital outputs
1
Output function
normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]
2.5
Permanent current rating of switching output DC [mA]
250
Short-circuit protection
Yes
Type of short-circuit protection
pulsed
Overload protection
Yes
Probe length L [mm]
45
Setting range [cm/s]
3...300
Greatest sensitivity [cm/s]
3...100
Setting range [cm/s]
200...3000
Greatest sensitivity [cm/s]
200...800
Repeatability [cm/s]
1...5
Note on repeatability
for water 5...100 cm/s; 25 °C; Factory setting
Temperature drift [cm/s x 1/K]
0.1; (for water 5...100 cm/s; 10...70 °C)
Temperature gradient [K/min]
300
Switch point accuracy [cm/s]
± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting)
Hysteresis [cm/s]
2...5; (for water 5...100 cm/s; 25 °C; Factory setting)
Response time [s]
1...10
Adjustment of the switch point
pushbutton
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
Profiles
Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable
SIO mode
Yes
Required master port type
A
Process data analogue
2
Process data binary
2
Min. process cycle time [ms]
3
Supported DeviceIDs
Type of operation: DeviceID; default: 54
Ambient temperature [°C]
-25...80
Storage temperature [°C]
-25...100
Protection rating
IP 65; IP 67
EMC
DIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistance
DIN IEC 60068-2-27: 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6: 20 g (55...2000 Hz)
MTTF [years]
298
Weight [g]
248.5
Housing
cylindrical
Dimensions [mm]
Ø 50 / L = 113
Materials
stainless steel (316L/1.4404); stainless steel (304/1.4301); PC; PBT-GF20; EPDM/X
Materials (wetted parts)
stainless steel (316L/1.4404); O-ring: FKM 80 Shore A
Probe diameter [mm]
8.2
Installation length EL [mm]
45
Display
function: 10 x LED, three-colour
Pack quantity
1 pcs.
Connector
1 x M12; coding: A; Contacts: 4
Report a product information error
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet
Official product pageifm

Source checked: 2026-09-11

Product questions

Send the part number and your question to support to check compatibility, lead time or specifications.

Additional information and order matching

The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Technical code verification

Model, revision and equipment compatibility are checked before final confirmation.

Clear product condition

New, surplus or refurbished condition and warranty terms are stated in the quotation.

Products outside the catalog

If this model is unavailable, send the part number or nameplate photo for custom sourcing.

Related products