Authenticity and condition
Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.
Specialist electrical and industrial automation store
Industrial communication module Siemens model 6ES71544AB100AB0
Check the part number and technical specifications before selection; an image alone is not sufficient for matching.
- Manufacturer part number
6ES71544AB100AB0- Manufacturer
- Siemens
- ARAN VISION part number
AV-FEED-96W596- Category
- PLC and HMI
- Product description
- Industrial communication module Siemens part number 6ES71544AB100AB0; Product type designation: IM 154-4 PN HF; Rated value (DC): 24 V; from supply voltage 1L+, max.: 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage. Technical specifications, condition and supply feasibility are checked before ordering.
- Manufacturer standard lead time
- Manufacturer confirmation required
Manufacturer replenishment time; delivery to you is confirmed separately.
- Datasheet
- ARAN VISION datasheet
Product attributes
- Product type designation
- IM 154-4 PN HF
- Rated value (DC)
- 24 V
- from supply voltage 1L+, max.
- 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage
- Interfaces/bus type
- PROFINET IO
- Transmission rate, max.
- 100 Mbit/s
- PROFINET IO
- Yes
- PROFIBUS
- No
- EtherNet/IP
- No
- between supply voltage and electronics
- Yes
- Width
- 135 mm
- Height
- 130 mm
- Depth
- 60 mm
- Vendor identification (VendorID)
- 0x002A
- Device identifier (DeviceID)
- 0x0305
- IRT
- Yes
- Reverse polarity protection
- Yes; against destruction
- Short-circuit protection
- Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not
- power supply according to NEC Class 2 required
- No
- Power loss, typ.
- 6 W; dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher
- Inputs
- 256 byte
- Outputs
- 256 byte
- Autonegotiation
- Yes
- PROFIsafe
- Yes
- SNMP
- Yes
- ping
- Yes
- ARP
- Yes
- MRP
- Yes
- Diagnostic alarm
- Yes; Parameterizable
- Hardware interrupt
- Yes; Parameterizable
- MAINT LED
- Yes
- LINK LED
- Yes
- RX/TX LED
- Yes
- For load voltage monitoring
- Yes
- Bus fault BF (red)
- Yes
- Group error SF (red)
- Yes
- Monitoring 24 V voltage supply ON (green)
- Yes
Documents and technical resources
ARAN VISION product sheetView and print specifications
Manufacturer datasheetOpen manufacturer datasheet
Official product pageSiemens
Source checked: 2026-09-11
Product questions
Send the part number and your question to support to check compatibility, lead time or specifications.
Additional information and order matching
The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.
Matching technical version
The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.
Delivery estimate before ordering
Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.
Technical code verification
Model, revision and equipment compatibility are checked before final confirmation.
Clear product condition
New, surplus or refurbished condition and warranty terms are stated in the quotation.
Products outside the catalog
If this model is unavailable, send the part number or nameplate photo for custom sourcing.
Related products
Official product image; © Schneider ElectricTM221CE16R
2907446
Representative product-family image; check the model specifications in the datasheet. © OmronCP2E-N14DR-ARepresentative product-family image; check the model specifications in the datasheet. © OmronCP2E-N14DT-A