Industrial communication module Siemens model 6ES71544AB100AB0

Industrial communication module Siemens part number 6ES71544AB100AB0; Product type designation: IM 154-4 PN HF; Rated value (DC): 24 V; from supply voltage 1L+, max.: 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage. Technical specifications, condition and supply feasibility are checked before ordering.

Manufacturer part number: 6ES71544AB100AB0
Brand: Siemens
Category: PLC and HMI
Status فهرست: Request a quotation

Specifications فنی

Product type designation: IM 154-4 PN HF
Rated value (DC): 24 V
from supply voltage 1L+, max.: 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage
Interfaces/bus type: PROFINET IO
Transmission rate, max.: 100 Mbit/s
PROFINET IO: Yes
PROFIBUS: No
EtherNet/IP: No
between supply voltage and electronics: Yes
Width: 135 mm
Height: 130 mm
Depth: 60 mm
Vendor identification (VendorID): 0x002A
Device identifier (DeviceID): 0x0305
IRT: Yes
Reverse polarity protection: Yes; against destruction
Short-circuit protection: Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not
power supply according to NEC Class 2 required: No
Power loss, typ.: 6 W; dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher
Inputs: 256 byte
Outputs: 256 byte
Autonegotiation: Yes
PROFIsafe: Yes
SNMP: Yes
ping: Yes
ARP: Yes
MRP: Yes
Diagnostic alarm: Yes; Parameterizable
Hardware interrupt: Yes; Parameterizable
MAINT LED: Yes
LINK LED: Yes
RX/TX LED: Yes
For load voltage monitoring: Yes
Bus fault BF (red): Yes
Group error SF (red): Yes
Monitoring 24 V voltage supply ON (green): Yes

Page رسمی Manufacturer دیتاشیت رسمی Manufacturer

این برگه, خلاصه فارسی Specifications محصول for Quick links است. for طراحی, Mounting and انتخاب نهایی, آخرین Official manufacturer documentation and تطابق Complete Part number بررسی شود.